2. Place the original on the exposure glass or in the ADF.
3. Add a destination by using one of the following methods:
To add a Speed Dial destination
1. Press the [Speed Dial] key.
2. Select a destination using the number keys, and then press the [OK] key.
3. Press the [OK] key.
To add a manually-specified destination
1. Enter the destination fax number using the number keys.
2. Press the [OK] key.
4. Go back to step 3 to add further destinations.
5. Press the [Start] key.
Specifying the destination using the redial function
This function saves time when you are sending to the same destination repeatedly, as you do not have to
enter the destination each time.
6. Sending and Receiving a Fax
64
To Next Page
Loading...
