Product Support Guide
Model M101 / M102 / M103
Ver.1.0 Page 16 of 18 6/26/2012
Subject to change without notice
Non Recommended Throughput Material
Refer to pages in the Operators Instructions Hardware Guide.
Do not use any of the following kinds of paper or a fault might occur:
Aluminum Foil, Carbon paper,
Conductive paper
Paper meant for an inkjet printer
Bent, folded, or creased paper
Torn paper
Thermal fax paper
Art paper
Paper with perforated lines
Hemmed-edge paper
Tab stock
Slippery paper
Perforated paper
Rough paper
Thin paper with little stiffness
Paper with a dusty surface
Envelopes
Special Paper
Not Applicable
Firmware Information
Firmware
Loaded using Smart Device Monitor
To Next Page
Loading...
