To Next PageTo Next PageHow to fix Ricoh Aficio SP 204SN All in One Printer if it does not turn on?
If your Ricoh All in One Printer does not turn on, ensure the power cord is correctly connected to both the printer and a working wall outlet. Try plugging another device into the outlet to confirm it is functional.
Why is photocopied paper dirty on Ricoh Aficio SP 204SN All in One Printer?
If your Ricoh All in One Printer is producing dirty photocopies, consider these possible causes and solutions: * The image density might be too high. Adjust the image density settings. * The toner on the printed surface may not be dry. Avoid touching printed surfaces immediately after copying, and remove freshly printed sheets carefully. * The scanning part could be dirty. * Ensure that toner or correction fluid on originals is dry before placing them on the exposure glass.
What to do if Ricoh Aficio SP 204SN paper jams occur frequently?
If paper jams occur frequently in your Ricoh All in One Printer, try the following: * Adjust the paper guides to eliminate any gaps between the paper and the guides. * Avoid printing on both sides of the paper when printing images that require a lot of toner. * Use supported paper types. * Do not load paper beyond the upper limit markings on the paper guide.
Why Ricoh Aficio SP 204SN All in One Printer feeds multiple sheets of paper at one time?
If your Ricoh All in One Printer is feeding multiple sheets of paper at once, try these steps: * Fan the paper well before loading it, and ensure the edges are even by tapping the stack on a flat surface. * Make sure the paper guides are correctly positioned. * Use supported paper types. * Do not load paper beyond the upper limit markings on the paper guide. * Only add paper when the tray is empty.
How to fix curled printed paper from Ricoh All in One Printer?
If the printed paper from your Ricoh All in One Printer is curled, try loading the paper upside down in the input tray. Also, ensure that the paper is not damp and has been stored properly.
Why is the whole printout blurred on Ricoh Aficio SP 204SN?
If the whole printout from your Ricoh All in One Printer is blurred: * Ensure the paper is not damp and has been stored properly. * Check if the [Toner Save:] option is enabled, as this can reduce print density. * If there has been a rapid change in temperature or humidity, allow the machine to acclimatize before use.
What to do if paper does not feed smoothly in Ricoh All in One Printer?
If paper does not feed smoothly in your Ricoh All in One Printer: * Use supported paper types. * Load paper correctly and adjust the paper guides properly. * If the paper is curled, straighten it before loading. * Take the paper out of the tray, fan it well, reverse the top and bottom sheets, and then put it back in the tray.
How to fix images printed diagonally on Ricoh Aficio SP 204SN All in One Printer?
If images are printed diagonally on the pages by your Ricoh All in One Printer, adjust the paper guides to eliminate any gaps between the paper and the guides.
How to fix paper wrinkles on Ricoh Aficio SP 204SN All in One Printer?
If the paper gets wrinkles when printing with your Ricoh All in One Printer: * Ensure the paper is not damp and has been stored properly. * Check that the paper is not too thin. * Adjust the paper guides to eliminate any gaps between the paper and the guides.
How to fix misaligned print position on Ricoh All in One Printer?
If the print position is misaligned on your Ricoh All in One Printer, specify [Registration] in [System Settings] to adjust the print position.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan |
| Print Speed (Black) | 22 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB 2.0, Ethernet |
| Paper Capacity | 250 sheets |
| Copy Speed | 22 cpm |
| Scan Resolution | 600 x 600 dpi |
| First Print Out Time | 8.5 seconds |
| Scan Type | Flatbed |
| Max Paper Size | A4 |
| Paper Size | A4, A5, B5 |
