11
4. From the CD-ROM menu, click [Network Quick Install (Fixed IP)].
CTT190
5. Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
6. Enter the MAC and IP addresses, and then click [OK].
To specify these in an IPv6 environment, click [Cancel], and then proceed to Step 8.
CTT191
MAC address
Enter the MAC address shown on the network setting list.
IP address
Enter the user's IP address.
The computer's IP address can be ascertained using Command Prompt.
To display the IP address, open Command Prompt, enter "ipconfig", and then press the
[Enter] key.
Enter the IP address of the computer being used with the variable part in the IP address
modified.
Subnet mask, Default gateway address
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
•
•
•
To Next Page
Loading...
