14
5. Press the [ ] or [ ] key to select [Off], and then press the [OK] key.
If you change this setting, the machine automatically reboots itself before the procedure can
be completed. When this happens, wait for the reboot to finish, repeat steps 1 to 3, and then
proceed to the next step.
6. Press the [
] or [ ] key to select [IP Address] , and then press the [OK] key.
7. Enter the machine’s IPv4 address using the number keys.
Press the [ ] key to move between fields.
8. Enter the values in all fields, and then press the [OK] key.
Specify the subnet mask and default gateway address as required in accordance with the
network environment.
After a setting has been changed, the machine automatically reboots itself.
For details about configuring the IPv6 address, see the User Guide .
You cannot configure the network settings while the machine is operating (printing, receiving a
fax, etc.). Correspondingly, the machine cannot receive print jobs and faxes while the network
settings are being configured (after clicking [Network Settings]).
•
•
To Next Page
Loading...
