Using the Scanner Function
16
Initial Screen and Basic Operation
Place the original face down on the exposure glass or face up
in the ADF.
Lift the ADF carefully without holding the inpu t tray. Otherwise, the ADF
might be damaged.
Exposure Glass ADF
BSP086S
BSP412S
• If necessary, configure advanced scan settings. For more details, see "Advanced Scan
Settings" on page 18.
Press the [Start] key.
Depending on the machine’s setting, the
following screen appears on the display.
Black-and-white scanning mode
Color or Grayscale scanning mode
BSP404S
BSP405S
Press [1] or [2] according to the desired file format.
Depending on the machine’s settings, you
may see the screen on the right on the
display when scanning from the exposure
glass. If you see this screen, proceed to
step 6. If not, proceed to step 8.
BSP089S
BSP402S
To Next Page
Loading...
