17
If you have more originals to scan, place the next original on
the exposure glass, and then press [1]. Repeat this step until
all originals are scanned.
When all originals have been scanned, press [2] to start
sending the scanned file.
Confirm that "Ready" appears on the display.
The scanned fi le is created in the root directory of the USB fl ash disk.
Remove the USB flash disk from the machine.
• To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan
files are discarded.
• You can set the machine to create scanned files in black and white, color, or grayscale by
changing the machine’s default settings. For details, see "Configuring the Machine Using the
Control Panel", User Guide.
• If paper is jammed in the ADF, the scan file is discarded. In this case, scan the entire originals
again. To remove paper jams in the ADF, see "Removing from the ADF" page 38.
• You can also specify a destination using the One Touch buttons or [Pause/Redial] key. For
details, see "Using the Scanner Function", User Guide.
• For information about originals, see "Getting Started", User Guide.
To Next Page
Loading...
