45
Where to Inquire
Contact your sales or service representative for further information about topics covered in this
manual or to inquire about topics not covered in this manual.
Saving Energy
This machine is equipped with the following Energy Saver modes: Energy Saver mode 1 and
Energy Saver mode 2.
By default, this machine is set to enter Energy Saver mode 2 if it has been idle for 1 minute.
The machine takes about 20 seconds to recover from Energy Saver mode 2.
According to your convenience, you can change how long the machine waits before entering
Energy Saver mode 2 by configuring the [Power Saver] setting under [Admin Settings].
• Even if Energy Saver mode 2 is enabled, the machine will not enter Energy Saver mode 2 for
two hours if [Low Humidity Mode] under [Machine Settings] is enabled.
• For details about [Power Saver], see "Administrator Settings", User Guide.
• For details about [Low Humidity Mode], see "Machine Settings", User Guide.
Copyright © 2009
v Opening Manuals
The "Manuals" CD-ROM provided with the machine contains manuals in
HTML format and PDF. Install the manuals before using the machine.
There are two ways to view the manuals.
• Double-click the manual icon on your desktop.
• On the [Start] menu, point to [All Programs], point to [Product Name], and
then click [Manual Name].
• The menu options may appear differently, depending on the options chosen
during installation.
• For details about installing the manuals, see "Guide to the Machine", User
Guide.
Appendix
To Next Page
Loading...
