014
Waste Toner Bottle Set Error
• Waste toner bottle not set
• Disconnected or defective harness of the waste toner bottle set sensor
• Defective waste toner bottle set sensor
1. Install the waste toner bottle.
2. Check or replace the harness of the waste toner bottle set sensor.
3. Replace the waste toner bottle set sensor.
030
Tray/Paper Selection Error
• No paper in the tray or tray not set in the machine
• Paper size requested by the job does not match the paper in the tray
1. Install the tray or put the correct size paper in the tray.
2. Check the paper setting in the user menu mode.
031
Paper Selection Error: Feed and Exit
• Paper size requested by the job does not match the paper in the tray
• Selection error for the paper feed and paper exit location in duplex mode
Check the paper feed and exit location in the user menu mode.
050
Jam Error: No Feed from Tray 1
• Paper slipped
Remove the paper jam at tray 1.
052
Jam Error: No Feed from Optional Tray
• Paper slipped
Remove the paper jam at the optional tray (Tray 2).
3. Appendix: Troubleshooting Guide
12
To Next Page
Loading...
Need help?
General