Group
(Tab)
Item Selections Remarks
SNMP
Community
Name
Null string *
Up to 15 alphanumeric characters.
The factory default is 'null string'.
Host IP Address 0.0.0.0 *
The factory default is 0.0.0.0
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Host IPX
Address
"FFFFFFFFFFFFFFFFFFFF" *
String length is 20.
The factory default is 20 "F" characters.
Valid characters are:
"0123456789ABCDEFabcdef"; not case
sensitive when setting but the capital
character will change to lower case when
reading.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
A valid string length is 0 or 20. String
lengths of 1 – 19 will cause the setting to
be invalid. But SOM will not create an error
message when the string length is in the
range of 1 – 19. The invalid string can be
saved at the printer side.
Apple
Talk
Printer Name "PublicWritter" *
String of maximum length 32.
The factory default string is "PublicWritter".
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Zone Name "*"
Default is "*". Up to 32 in length.
The factory default string is "*".
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
"*" indicates the factory default value.
Smart Organizing Monitor
43
To Next Page
Loading...
