Item Selections Remarks
S. Mode [0 to 7F]
This adjusts the M/A of toner.
0x00: Normal (Default: no reduction)
0x06: 20% reduction
0x07: 10% reduction
Engine Firmware update
button
Engine firmware update button
Clear Counter (except
total)
This is used by Service. This clears all counters
(except Total Counter).
"*" indicates the factory default value.
SP Mode 2
Item Selections Remarks
Init Engine EEPROM
This clears all counters except "Full Color"
and "Black and White" in the total counter.
When you click the [Init Engine EEPROM]
button, the engine EEPROM is initialized.
Turn the machine power off/on after you
change this setting.
4. Appendix: SP Mode Tables
48
To Next Page
Loading...
