Turning On/Off the Power
This section describes how to turn on/off the printer.
Turing On the Power
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Push the main power switch.
The power indicator turns on.
• The printer may make a noise while initializing. This noise does not indicate a malfunction.
Turning Off the Power
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Do not press and hold the main power switch when turning off the printer. Doing so shuts down the
printer forcefully and may damage the hard disk and the SDRAM module, causing a malfunction of
the printer.
• Before unplugging the power cord plug, turn off the main power switch and make sure the main
power switch indicator turns off. Not doing so may result in damage to the hard disk or memory,
leading to malfunctions.
• Do not turn off the power while the printer is in operation.
1. Getting Started
18
To Next Page
Loading...
Need help?
General