42
AL-C2 Training
Slide 42
7
New Feature for this Series
External USB Keyboard
This lets you use a Windows-
compatible external USB
Keyboard for typing when the
software keyboard is displayed
in GW applications.
Before you can use an external
USB keyboard for GW
applications, it must be enabled
in SP mode. (Default setting: for
SDK applications)
You cannot type in both SDK
applications and GW
applications from one
keyboard. If the USB keyboard
is used for GW applications, it
can’t be used for SDK
applications.
The external USB keyboard can
be connected to the USB port on
the operation panel or the USB
port on the back of the controller
board.
Keyboards and tables are not
provided as options.
No additional notes
To Next Page
Loading...
