Ricoh D129 Service Training

89
AL-C2 Training
Slide 89
Scanner
Exposure Lamp Replacement
 Before installing the new exposure lamp, check the first
three digits [A] in the bar-code on the new lamp.
 After installing the new lamp, go to SP4-954-005 and adjust
the setting, referring to the table in the service manual.
Service Manual, Replacement and Adjustment, Scanner Unit,
Exposure Lamp
 This setting is called the ‘chromaticity rank’, and needs to be adjusted for each
lamp.

Ricoh D129 Specifications

General

Brand	Ricoh
Model	D129
Category	All in One Printer
Language	English