Ricoh D146 - Page 742

Main SP Tables-1
System Maintenance Section 2-23 D146/D147/D148/D149/D150
SP Mode Tables
022
Temp.:Upper Delta:Center *ENG [0 to 200 / 30 / 1deg/step]
Do not change. Paper feed start permission temp. upper diff from target temp. :
center
023
Temp.:Upper Delta:End *ENG [0 to 200 / 30 / 1deg/step]
Do not change. Paper feed start permission temp. upper diff from target temp. :
edge
024
Temp.:Lower Delta:Press *ENG
[0 to 200 / D146:26, D147:26,
D148:8, D149:17, D150:17 /
1deg/step]
Do not change. Paper feed start permission temp. lower diff from target temp. :
pressure
025
Temp.:Lower Delta:Press *ENG
[0 to 200 / D146:43, D147:43,
D148:25, D149:34, D150:34 /
1deg/step]
Do not change. Paper feed start permission temp. lower diff from target temp. :
pressure
026
Rotation Time *ENG [0 to 100 / 0 / 1sec/step]
Do not change. Paper feed start permission temp. : before decision rotate time
027
Temp.:Lower Delta:Center *ENG [0 to 200 / 5 / 1deg/step]
Do not change. Paper feed start permission temp. lower diff from target temp. :
center
028
Temp.:Lower Delta:End *ENG [0 to 200 / 5 / 1deg/step]
Do not change. Paper feed start permission temp. lower diff from target temp. :
edge
029
Temp.:Upper Delta:Center *ENG [0 to 200 / 30 / 1deg/step]
Do not change. Paper feed start permission temp. upper diff from target temp. :
center
030
Temp.:Upper Delta:End *ENG [0 to 200 / 30 / 1deg/step]
Do not change. Paper feed start permission temp. upper diff from target temp. :
edge