Ricoh D146 - Page 747

Main SP Tables-1
D146/D147/D148/D149/D150 2-28 System Maintenance Section
003
Plain1:BW:Center *ENG
[100 to 180 / D146:115, D147:115,
D148:126, D149:142, D150:142 /
1deg/step]
Paper through target temperature: Standard paper 1: BW: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
004
Plain1:BW:Press *ENG
[0 to 200 / D146:118, D147:118,
D148:118, D149:133, D150:133 /
1deg/step]
Do not change. paper through target temperature: Standard paper 1: BW:
pressure
005
Plain2:FC:Center *ENG
[100 to 180 / D146:123, D147:123,
D148:141, D149:157, D150:157 /
1deg/step]
Paper through target temperature: Standard paper 2: FC: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
006
Plain2:FC:Press *ENG
[0 to 200 / D146:118, D147:118,
D148:118, D149:143, D150:143 /
1deg/step]
Do not change. paper through target temperature: Standard paper 2: FC:
pressure
007
Plain2:BW:Center *ENG
[100 to 180 / D146:120, D147:120,
D148:136, D149:148, D150:148 /
1deg/step]
Paper through target temperature: Standard paper 2: BW: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.