Ricoh D146 - Page 753

Main SP Tables-1
D146/D147/D148/D149/D150 2-34 System Maintenance Section
Paper through target temperature: special paper 3: BW: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
040
Special3:BW:Press *ENG
[0 to 200 / D146:118, D147:118,
D148:118, D149:140, D150:140 /
1deg/step]
Do not change. paper through target temperature: special paper 3: BW:
pressure
041
Envelop:Center *ENG [100 to 180 / 142 / 1deg/step]
Paper through target temperature: envelope: FC: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
042
Envelop:Press *ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: envelope: FC: pressure
051
Special1:FC:Center:Middle
Speed
*ENG
[100 to 180 / D146:122, D147:122,
D148:141, D149:141, D150:141 /
1deg/step]
paper through target temperature: special paper 1: FC: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
052
Special1:FC:Press:Middle
Speed
*ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: special paper 1: FC:
pressure
053
Special1:BW:Center:Middle
Speed
*ENG
[100 to 180 / D146:122, D147:122,
D148:141, D149:141, D150:141 /
1deg/step]