Ricoh D146 - Page 754

Main SP Tables-1
System Maintenance Section 2-35 D146/D147/D148/D149/D150
SP Mode Tables
Paper through target temperature: special paper 1: BW: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
054
Special1:BW:Press:Middle
Speed
*ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: special paper 1: BW:
pressure
055
Special2:FC:Center:Middle
Speed
*ENG
[100 to 180 / D146:127, D147:127,
D148:146, D149:146, D150:146 /
1deg/step]
Paper through target temperature: special paper 2: FC: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
056
Special2:FC:Press:Middle
Speed
*ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: special paper 2: FC:
pressure
057
Special2:BW:Center:Middle
Speed
*ENG
[100 to 180 / D146:127, D147:127,
D148:146, D149:146, D150:146 /
1deg/step]
Paper through target temperature: special paper 2: BW: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
058
Special2:BW:Press:Middle
Speed
*ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: special paper 2: BW:
pressure
059
Special3:FC:Center:Middle
Speed
*ENG
[100 to 180 / D146: 132, D147: 132,
D148: 151, D149: 151, D150: 151 /
1deg/step]