Ricoh D146 - Page 758

Main SP Tables-1
System Maintenance Section 2-39 D146/D147/D148/D149/D150
SP Mode Tables
Do not change. paper through target temperature: special paper 1: FC:
pressure: low speed
119
Special1:BW:Center:Low
Speed
*ENG [100 to 180 / 137 / 1deg/step]
Paper through target temperature: special paper 1: BW: center: low speed
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
120
Special1:BW:Press:Low
Speed
*ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: special paper 1: BW:
pressure: low speed
121
Special2:FC:Center:Low
Speed
*ENG [100 to 180 / 142 / 1deg/step]
Paper through target temperature: special paper 2: FC: center: low speed
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
122
Special2:FC:Press:Low
Speed
*ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: special paper 2: FC:
pressure: low speed
123
Special2:BW:Center:Low
Speed
*ENG [100 to 180 / 142 / 1deg/step]
Paper through target temperature: special paper 2: BW: center: low speed
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
124
Special2:BW:Press:Low
Speed
*ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature: special paper 2: BW:
pressure: low speed