Ricoh D146 - Page 759

Main SP Tables-1
D146/D147/D148/D149/D150 2-40 System Maintenance Section
125
Plain1:Glossy:Center *ENG [100 to 180 / 132 / 1deg/step]
Paper through target temperature: Standard paper 1: coat: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
126
Plain1:Glossy:Press *ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature coat: standard 1: pressure
127
Plain2:Glossy:Center *ENG [100 to 180 / 137 / 1deg/step]
Paper through target temperature: Standard paper 2: coat: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
128
Plain2:Glossy:Press *ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature coat: standard 2: pressure
129
M-thick:Glossy:Center *ENG [100 to 180 / 142 / 1deg/step]
Paper through target temperature: Standard paper 2: coat: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
130
M-thick:Glossy:Press *ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature coat: middle thick: pressure
131
OHP:Center *ENG [100 to 180 / 160 / 1deg/step]
paper through target temperature OHP: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
132
OHP:Press *ENG [0 to 200 / 118 / 1deg/step]
Do not change. paper through target temperature OHP: pressure
133 Envelop:Center:Low Speed *ENG [100 to 180 / 142 / 1deg/step]