Ricoh FT5535 - Page 31

- A153/A155/A156 copiers -
5. Open the front cover and swing out the toner bottle holder [A].
6. Remove the strips of tape [B].
7. Remove the switch actuator lock bracket [C] as shown.
8. Turn the "A1" lever [D] counterclockwise to lower the transfer belt unit. Then
remove the cushion sheet [E].
9. Remove the blade release wedge [F] together with the pick off pawl release
mylar [G].
10. Return the "A1" lever to the set position.
[C]
[A]
[B]
[B]
[F]
[G]
[E]
[D]
[C]
[A]
[B]
- A157/A159/A160 copiers -
FSM 3-7 FT5535/4527/4522