EasyManua.ls Logo

Ricoh FT5535 - Page 82

Ricoh FT5535
685 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mode No. Function Settings
°5-404-001
to
5-404-002
User Code
Counter Clear
Resets the user code counters.
SP5-404-001: Resets the counter for the
user code that is now displayed in the
reduce/enlarge indicator.
SP5-404-002: Resets all the UC counters.
To reset the counter(s), press .
SP5-404-001: The user code must be input at
the numeric keys before it can be displayed
and the counter reset, so you must know what
user codes are in use. Take a look with
SP5-405.
°5-405 User Code
Number Setting
Use this mode to input the user code numbers
(max. 3 digits).
1 ~ 999
(max. 50 codes)
Up to 50 user codes can be set. To input a
code, enter it at the numeric keys then press
the R/# key. Then you can input another. To
check the user codes input so far, use the
and keys. The user codes input
will be displayed in reduce/enlarge counter.
°5-407-001
to
5-407-002
User Code
Number Clear †
Deletes user code numbers.
SP5-404-001: Deletes individual user
code numbers. Enter the required user code
at the numeric keys, then press the
key. (To see which user codes are being
used, use SP5-405.)
SP5-407-002: Deletes all the user code
numbers.
°5-408 Number of
Registered
User Codes
Display †
Displays the number of registered user codes
in the reduce/enlarge indicator.
°5-501-001 PM Interval
Setting †
Sets the PM interval.
(1000 copies per step [Range: 1 to 999])
1 ~ 999
120: Type 1
100: Type 2
°5-501-002 PM Interval
Setting (PM
Alarm Mode
Setting)
Specifies whether PM alarm mode is on or off. 0: OFF
1: ON
If PM alarm mode is on, the manual ID
level/ADS indicator and copy counter blink
when the PM counter reaches the PM interval.
5-504 RDS/CSS Alarm Level for Paper Jam (Paper Jam Alarm Level Setting)
Used in Japan only. Do not change the factory setting.
5-505 RDS/CSS Alarm Level for SC (Service Call Alarm Level Setting) †
Used in Japan only. Do not change the factory setting.
°5-507 RDS/CSS Alarm Level for Supplies (Supply Alarm Mode Setting) †
Used in Japan only. Do not change the factory setting.
Rev. 7/95
FSM 4-31 FT5535/4527/4522

Related product manuals