34
1 Turn the main switch off.
2 Hold down the Emergency Stop key, then
turn the copier back on.
The jam and service indicators will blink.
3 Input the settings you want.
4 Turn the main switch off.
The next time you turn the copier on or press the Clear Modes key, the settings you programmed
in step 3 will take effect.
B) Changing The Default Setting
SM067
Copy Media
Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver
To Next Page
Loading...
