63
COPIER
Configuration Console
Process Dry electrostatic transfer system
Scanning Original moving over a fixed fiber optics array
Originals Sheet
Original Reference Position Center
Original Size Maximum: 914 (W) × 2,000mm (L) (36” × 80”)
Minimum: A4
(210 (W) × 297mm (L)) (8.5” × 11”)
Copy Size Maximum: 914 (W) × 2,000mm (L) (36” × 80”)
Minimum: A4
210 (W) × 297mm (L)) (8.5” × 11”)
Warm-up Time Within 5 minutes at a room temperature of 74°F (23°C)
First Copy Within 30 seconds(A1
, 23”×35”,)
Copying Speed 3000mm (118.1”) per minute
Automatic reset 2 minutes (can also be turned off or set to 1, 3, 4m or 5 minutes)
Reproduction Ratio Fixed: 1 to 1
Paper Feed manual feed/optional roll feeder
Multiple Copies Up to 10
Toner replenishment Cartridge system
Self-diagnostic codes LED indicators
Power Source North America: 120V, 60Hz, 12A
Power consumption Maximum 1.4kW
Noise emission Stand by, less than 57dB
Copy cycle, less than 75dB (copier only)
Measurements made following ISO7779
Dimension (W × D × H) 1,080 × 803 × 480mm (42.5” × 31.6” × 18.9”)
Weight 80kg (176.2lb)
6. SPECIFICATIONS
To Next Page
Loading...
