35
USER TOOLS
Access the User Tools to make the following adjustments:
A.1) Magnification Adjustment; Allows you to adjust the degree of vertical
magnification of copied image
–1.0 ~ +1.0% (by 0.05% Initial Value: 0)
A.2) Cut Length; Allows you to adjust the cut length.
– 25 ~+25mm (–1.0” ~ –1.0”) (by 1mm, or 0.1")
1 Hold down the Program key for at least 3
seconds.
“A.1” blinks on the “Copy Counter” dis-
play.
2 If you wish to adjust the Cut Length (A.2),
press + key. “A.2” blinks on the display.
3 Press the Function key
The “Paper Length” display shows the cur-
rent value.
4 Use the + and - key to change the value
5 Press the Program key to return to step 2.
6 Press the Clear Modes key to exit this mode.
Copy Media
Lighter
Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver
Paper Length
Synchro
Preset/
Variable
Leading Edge
Trailing Edge
Copy Counter
Function Select
Bypass Select/
Roll Paper Cut
Cut Select
Preset Cut
To Next Page
Loading...
