7. Hook the tab on the interface cover, which is located on the side of the rear cover.
8. Close the rear cover.
9. Plug in the power cord, and then turn on the machine.
10. Check that the SD card was installed correctly.
• You can confirm that the SD card was installed correctly by checking the control panel menu or
configuration page.
• XPS card/PostScript 3 unit: Printing the configuration page, if the card is installed properly,
corresponding option's name will appear for "Printer Language" in "System Reference".
• See "List / Test Print", User Guide (Full Version).
• VM card: Extended Feature Settings appears in Machine Features Settings.
• Fax connection unit: The menu for fax connection will appear in Fax Settings.
• OCR unit: The menu for OCR will appear in the PDF settings on the Scanner screen.
• If the card is not installed properly, repeat the procedure from the beginning. If it cannot be
installed correctly even after trying the installation a second time, contact your sales or service
representative.
• Do not touch the card while the machine is in use. It may come loose, even if pushed only slightly.
The slot cover must be reattached.
Installing SD Card Options
37
To Next Page
Loading...
Need help?
General
