What to do if Ricoh IM C2510 All in One Printer displays Functional Problems SCXXX-XX Contact error?
The machine requires maintenance or repair. If a message prompts you to turn the power off and then on, the problem may be resolved by turning off the power, waiting for at least 10 seconds after the main power indicator is off, and then turning the power back on.
What does Service Call SCXXX-XX Contact mean on Ricoh IM C2510?
The machine needs to be repaired; consider arranging for a repair service.
Why did my Ricoh IM C2510 automatically reset?
The machine has been reset to its default state because it was unoperated for a specified period. If you were performing an operation and it paused, you must perform the operation again from the beginning.
How to fix 'You cannot access the machine using Web Image Monitor' on Ricoh IM C2510?
Check the cable connecting the machine and the computer, disconnect it, and then reconnect it. Also, check the connection to the hub or router and, if possible, turn the device's power off and on. Next, turn off the power of the machine, wait for at least 10 seconds after the main power indicator is off, and then turn the power on again.
What to do if Ricoh IM C2510 displays the User Code entry screen?
Enter the User Code, and press [OK]. Consult the user administrator for the user code.
Why User Code screen appears when using Device Manager NX with Ricoh IM C2510?
Install the certificate on the computer. Consult your network administrator for the certificate.
What to do for 'Caution Copy: Forgot Original' message on Ricoh IM C2510 All in One Printer?
Check that an original is not left on the exposure glass and that paper is loaded in the paper tray.
Why won't my Ricoh IM C2510 turn on?
Connect the ground wire and plug the power cable directly into the wall outlet. You cannot use an extension cord. If that doesn't work, plug the power cord into a confirmed operating wall outlet.
What to do if the keys are unresponsive on Ricoh IM C2510?
Turn off the power of the machine, wait for at least 10 seconds after confirming that the main power indicator is off, and then turn the power on again. If the message persists even after you have turned the power off and then on, consider repairing the machine.
How to stop my Ricoh All in One Printer from turning off automatically?
Disable [Weekly Timer Easy Settings] and [Weekly Timer Detailed Settings] on [Settings] [System Settings] [Date/Time/Timer] [Timer].
Explains touch gestures like flick, drag, and pinch for screen interaction.
Covers the basic procedure for copying documents using the exposure glass or ADF.
Explains how to scan and save documents in the machine's document server.
Details how to print documents stored in the document server.
Guides on printing documents using the original scan settings.
Covers the basic procedures for sending faxes, including manual and memory transmission.
Allows previewing scanned documents before sending them via fax.
Explains how to view fax transmission results through reports or the fax screen.
Covers printing procedures, driver setup, and basic settings for Windows and macOS.
Covers scanning fundamentals, sending via email, and to folders.
Details setting up and sending scanned data to shared folders on computers.
Provides instructions and precautions for replacing the toner cartridge.
Provides solutions for situations where the machine is unresponsive.
Addresses issues related to control panel operations.
Covers troubleshooting problems with computer-based operations.
Lists common messages and their solutions for various machine functions.
Covers methods for installing printer drivers using Device Software Manager or from downloaded files.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 dpi |
| Maximum Paper Size | A3 |
| Duplex Printing | Yes |
| Warm-up Time | 21 seconds |
| Hard Disk Drive | 320 GB (optional) |
| Paper Output Capacity | 500 sheets |
| Fax | Optional |
| Fax Speed | 33.6 kbps |
| Print Speed | 25 ppm |
| Copy Speed | 25 cpm |
| Scan Speed | 80 ipm (simplex), 160 ipm (duplex) |
| Connectivity | USB, Ethernet, Wi-Fi |
| Touchscreen | Yes |
| Memory | 2 GB |
| Supported Paper Sizes | A3, A4, A5, B4, B5 |
| Supported Paper Weights | 52 - 300 gsm |
| Power Source | AC 220-240V, 50/60Hz |
| Power Consumption | 1.5 kW (max) |
| Dimensions | 587 x 685 x 788 mm |
To Next Page