3. Press [NEXT].
4. Display the login screen on the control panel of the machine, and hold the mobile
device over the touch mark.
• To log out from the machine, hold the mobile device over the touch mark on the
control panel or press [Logout] at the top right on the screen.
• If another user holds a mobile device over the touch mark while you are still logged
in, you are automatically logged out and the new user logs in.
Authenticating Using the User Code
When User Code Authentication is specified as the authentication method on the
machine, enter the user code before operating an application.
1. Enter the user code, and then press [OK].
• When you finish the operation of the application, press [Energy Save] ( ) or press
and hold [Reset] to release the authentication status.
To Next Page
Loading...
