To Next PageTo Next PageWhy Ricoh IM C3000 power does not come on?
If your Ricoh All in One Printer isn't powering on, there could be a few reasons. First, ensure the power cable is securely plugged into the wall outlet, using the ground wire. Avoid extension cords; plug the printer directly into the wall. Finally, there might be an issue with the wall outlet itself, so try plugging the printer into a different outlet that you know is working.
What to do if nothing is displayed when I touch the screen of my Ricoh IM C3000?
If nothing is displayed when you touch the screen of your Ricoh All in One Printer, the power of the machine might be turned off. Check that the main power indicator is not lit, and then turn on the main power of the machine.
Why the screen of my Ricoh IM C3000 is not lit?
If the screen of the control panel on your Ricoh All in One Printer is not lit, the machine is likely in sleep mode. Simply touch the screen to wake it up.
What to do if a function is not executed on my Ricoh All in One Printer?
If a function isn't executing or you can't perform an operation on your Ricoh All in One Printer, it might be because another function is running that can't be used at the same time. Wait for the current function to finish before starting the next operation.
What to do if my Ricoh IM C3000 is beeping five short times repeatedly?
To resolve the issue, check the message displayed on the screen of your Ricoh All in One Printer and follow the instructions to remove any jammed paper or originals, or replace the toner if needed.
Why is the User Code entry screen displayed on my Ricoh IM C3000 All in One Printer?
If the User Code entry screen is displayed on your Ricoh All in One Printer, it means User Code authentication is enabled. Enter your User Code and press [OK]. If you don't know your User Code, consult your user administrator.
What to do if help content is not displayed on my Ricoh IM C3000 All in One Printer?
If the screen changes to Web Browser when you press [Help] on your Ricoh All in One Printer, but the help content is not displayed, the machine may not be connected to the network correctly. Check if you can display a web page in [Web Browser]. If a web page cannot be displayed, ensure that the machine is properly connected to the network.
What to do if the key is unresponsive on my Ricoh IM C3000 All in One Printer?
If a key is unresponsive or another key is activated on your Ricoh All in One Printer, a temporary malfunction might be occurring. Turn off the printer, wait at least 10 seconds after the main power indicator turns off, and then turn it back on.
What does it mean when my Ricoh IM C3000 All in One Printer beeps five long times repeatedly?
Check that an original is not left on the exposure glass and that paper is loaded in the paper tray of your Ricoh All in One Printer.
What to do if my Ricoh IM C3000 beeps 12 short times?
Check that the original is placed in the ADF with the side to scan facing up on your Ricoh All in One Printer.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Duplex Printing | Yes |
| Fax | Optional |
| Fax Speed | 33.6 Kbps |
| Print Speed | 30 ppm (black/white), 30 ppm (color) |
| Maximum Paper Capacity | 4, 700 sheets |
| Standard Connectivity | USB, Ethernet |
| Mobile Printing | Apple AirPrint, Mopria |
| Supported Paper Sizes | A3, A4, A5, B4, B5, Legal, Letter |
| Dimensions | 587 x 685 x 788 mm |
Outlines the essential steps to make a copy of a document using the machine.
Covers specifying copy ratios, sizes, and fitting to paper size for enlargement or reduction.
Instructions for performing two-sided copying on a single sheet of paper.
Outlines the fundamental steps for sending a fax document from the machine.
Guides on installing printer drivers using Device Software Manager for Windows.
Guides on installing printer drivers over a network for macOS systems.
Provides procedures for printing documents from Windows and macOS, including basic steps and settings.
Covers sending scanned data via email, including basic procedures and registering email destinations.
Details on sending scanned data to folders, including network setup and address book registration for Windows/macOS.
Instructions on how to store scanned documents in the machine's document server.
Covers printing, changing settings, and specifying pages for documents stored in the server.
Covers replacing toner, precautions during storage and replacement, and proper disposal methods.
