To Next Page
M
Mary NguyenSep 12, 2025
Why can't I execute a function on my Ricoh IM C4510 All in One Printer?
- RRobert JamesSep 12, 2025
Wait for the function in progress to end, and then perform the next operation.
Why can't I execute a function on my Ricoh IM C4510 All in One Printer?
Wait for the function in progress to end, and then perform the next operation.
What does Service Call SCXXX-XX Contact mean on Ricoh IM C4510?
The machine needs to be repaired; consider arranging for a repair service.
Why did my Ricoh All in One Printer automatically reset?
The machine has been reset to its default state because it was unoperated for a specified period. If you were performing an operation and it paused, you must perform the operation again from the beginning.
How to fix 'You cannot access the machine using Web Image Monitor' on Ricoh IM C4510 All in One Printer?
Check the cable connecting the machine and the computer, disconnect it, and then reconnect it. Also, check the connection to the hub or router and, if possible, turn the device's power off and on. Next, turn off the power of the machine, wait for at least 10 seconds after the main power indicator is off, and then turn the power on again.
What to do if Ricoh All in One Printer displays the User Code entry screen?
Enter the User Code, and press [OK]. Consult the user administrator for the user code.
Why User Code screen appears when using Device Manager NX with Ricoh IM C4510 All in One Printer?
Install the certificate on the computer. Consult your network administrator for the certificate.
Why does Ricoh IM C4510 All in One Printer open Web Browser instead of Help content?
Check if you can display a web page in [Web Browser]. If a web page cannot be displayed, check that the machine is connected to the network correctly.
What to do if Ricoh IM C4510 All in One Printer does not shut down?
Press the main power switch again. If the message persists even after you have turned the power off and then on, consider repairing the machine.
What to do if nothing is displayed when touching the screen on Ricoh IM C4510 All in One Printer?
Check that the main power indicator is not lit, and then turn on the main power of the machine.
How to stop my Ricoh IM C4510 from turning off automatically?
Disable [Weekly Timer Easy Settings] and [Weekly Timer Detailed Settings] on [Settings] [System Settings] [Date/Time/Timer] [Timer].
General| Category | All in One Printer |
|---|---|
| Print Speed | 45 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed | 45 cpm |
| Copy Resolution | 600 x 600 dpi |
| Standard Functions | Print, Copy, Scan, Fax |
| Warm-up Time | 21 seconds |
| Hard Disk Drive | 320 GB |
| Monthly Duty Cycle | 150, 000 pages |
| Type | Laser |
| Scan Resolution | 600 dpi |
| Fax Resolution | 200 x 200 dpi |
| Paper Capacity | Standard: 1, 200 sheets; Maximum: 4, 700 sheets |
| Duplex Printing | Yes |
| Network Connectivity | Ethernet, Wi-Fi, USB |
| Memory | 2 GB RAM |
| Control Panel | 10.1" Smart Operation Panel |
| Operating System Compatibility | Windows, Mac, Linux |
