Copying onto Envelopes in the Bypass Tray
• The Duplex Copy function cannot be used for envelopes. If Duplex Copy is
specified, press one of the following keys to cancel the setting.
1. Press [Copy] on the Home screen.
2. Set the envelope in the bypass tray with the copying side face down.
page296”Envelope Orientation and Recommended Status”
The "Bypass Tray Paper Settings" screen is displayed.
3. Press [Change Setting].
When the paper type is set to [Envelope], the envelope size is detected
automatically. If the displayed envelope size is not the same as the actual size,
manually select the correct envelope size.
When the paper type is not set to [Envelope], manually select the type and size.
4. Select [Envelope], and then proceed to the next screen.
To Next Page
Loading...
