Ricoh IM C4510 - Making Enlarged or Reduced Copies; Specifying a Copy Ratio or Size

2. Copy
114
2
Making Enlarged or Reduced Copies
You can enlarge or reduce the original when copying with the following methods:
• Enlarging or reducing at a specified reduction ratio or into a specified size
(Zoom/Reduce/Enlarge/Size Magnification/Directional Magnification (%)/Directional
Size Magnification)
• Enlarging or reducing according to the paper size (Auto Reduce/Enlarge)
• Reducing slightly (Create Margin)
Specifying a Copy Ratio or Size
1. Press [Copy] on the Home screen.
2. Place the original.
page107”Basic Procedure for Copying Documents”
The base point of reduce/enlarge is different for the exposure glass and Auto
Document Feeder (ADF) as shown in the following table:
Setting
position
Base point
Enlarge
Reduce
Exposure
glass
Enlarged or reduced from the
top left.
ADF
Enlarged or reduced from the
bottom left
When you place two-sided originals in the One-pass duplex scanning ADF, the top
right corner of the original will be the base point for the enlargement/reduction of