the reverse side. To enlarge or reduce from the same point, set the original on the
exposure glass and perform 2-sided copy.
3. Press [Copy Ratio] and select a copy ratio or size.
To specify a copy ratio or size other than the displayed setting, press [Others] and
perform the following procedure.
Specifying a copy ratio (Zoom/Reduce/Enlarge)
Enter a value or select the copy ratio.
Specifying a size (Size Magnification)
Scroll down the [Copy Ratio] screen to press [Specify Copy Size], and then enter
the length of the original and copied image, and then press [OK].
Specify the vertical and horizontal magnification individually
(Directional Magnification(%))
Scroll down the [Copy Ratio] screen to press [Directional Magnification(%)], and
then enter the vertical and horizontal magnification, and then press [OK]. You
can separately enlarge or reduce the vertical length and horizontal length of the
image.
To Next Page
Loading...
