What to do if Ricoh IM C3510 displays Functional Problems SCXXX-XX Contact error?
The machine requires maintenance or repair. If a message prompts you to turn the power off and then on, the problem may be resolved by turning off the power, waiting for at least 10 seconds after the main power indicator is off, and then turning the power back on.
What does Service Call SCXXX-XX Contact mean on Ricoh IM C3510?
The machine needs to be repaired; consider arranging for a repair service.
Why did my Ricoh All in One Printer automatically reset?
The machine has been reset to its default state because it was unoperated for a specified period. If you were performing an operation and it paused, you must perform the operation again from the beginning.
How to fix 'You cannot access the machine using Web Image Monitor' on Ricoh IM C3510 All in One Printer?
Check the cable connecting the machine and the computer, disconnect it, and then reconnect it. Also, check the connection to the hub or router and, if possible, turn the device's power off and on. Next, turn off the power of the machine, wait for at least 10 seconds after the main power indicator is off, and then turn the power on again.
What to do if Ricoh All in One Printer displays the User Code entry screen?
Enter the User Code, and press [OK]. Consult the user administrator for the user code.
Why User Code screen appears when using Device Manager NX with Ricoh IM C3510 All in One Printer?
Install the certificate on the computer. Consult your network administrator for the certificate.
What to do for 'Caution Copy: Forgot Original' message on Ricoh IM C3510?
Check that an original is not left on the exposure glass and that paper is loaded in the paper tray.
Why won't my Ricoh IM C3510 turn on?
Connect the ground wire and plug the power cable directly into the wall outlet. You cannot use an extension cord. If that doesn't work, plug the power cord into a confirmed operating wall outlet.
What to do if the keys are unresponsive on Ricoh IM C3510 All in One Printer?
Turn off the power of the machine, wait for at least 10 seconds after confirming that the main power indicator is off, and then turn the power on again. If the message persists even after you have turned the power off and then on, consider repairing the machine.
How to stop my Ricoh IM C3510 All in One Printer from turning off automatically?
Disable [Weekly Timer Easy Settings] and [Weekly Timer Detailed Settings] on [Settings] [System Settings] [Date/Time/Timer] [Timer].
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 dpi |
| Fax Speed | 33.6 Kbps |
| Fax Resolution | 200 x 200 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Duplex Printing | Yes |
| Mobile Printing | Apple AirPrint, Mopria, Ricoh Smart Device Connector |
| Type | Colour Multifunctional Printer |
| Print Speed | 35 ppm |
| Copy Speed | 35 cpm |
| Scan Speed | 70 ipm |
| Paper Size | A4, A5, B4, B5 |
| Connectivity | USB 2.0, Ethernet |
| Control Panel | 10.1 inch Smart Operation Panel |
| Memory | 2 GB |
| Hard Disk Drive | 320 GB |
| Network Connectivity | 10Base-T/100Base-TX/1000Base-T |
To Next Page