"Exceeded the
maximum number
of multi-sheet fold."
The maximum
number of sheets
that can be
specified for multi-
sheet fold has been
exceeded.
Check the number of sheets that can be
specified for multi-sheet fold, and then
reduce the number of originals before
loading them.
page308”List of Specifications”
When the internal multi-fold unit is
attached, you can specify whether to
continue or stop printing in [Settings]
[Copier / Document Server Settings]
[Finishing] [Fold] [If Too Many
Sheets for Multi-sheet Fold, Set].
See "Finishing", User Guide (HTML).
"Exceeded the
maximum number
of sheets that can
be used. Copying
will be stopped."
When the copy
volume use
limitation is
enabled, copying
was canceled
because the copy
volume of the user
exceeded the upper
limit allotted for the
user.
For details about the copy volume use
limitation, consult the user administrator
(or custom-privileges administrator who
has equivalent privilege). The user
administrator can change the limit on the
copy volume use.
See "Specifying Maximum Print Volume
Use of Each User", User Guide (HTML).
"Set next original(s)
within the following
seconds, then press
[Start]."
Duplex copying is
specified.
When not copying onto both sides of
paper, clear the [1 sided→2 sided] and [2
sided→2 sided] check boxes.
"Stapling capacity
exceeded."
The number of
sheets that can be
stapled together is
exceeded.
Check the number of sheets that can
stapled together at a time, and reduce the
number of sheets in the original placed on
the machine.
page308”List of Specifications”
When a Message Appears While Using Document Server
For details about the messages that are displayed when printing a document, see the
descriptions of the messages that are displayed in the copy function.
page218”When a Message Appears While Using the Copy Function”
To Next Page
Loading...
