2. On the "Printer Preference" screen, select one of the port names from among
"Port Name", and then click [Next].
Printer driver installation starts.
For details about the procedure for specifying the IP address after installing
the printer driver, see the following section:
See "When You Cannot Print a Document even if the Printer Driver is
Installed", User Guide (HTML).
3. When prompted to select whether to install Device Software Manager, select
whether to install Device Software Manager.
To install Device Software Manager select the [Install Device Software Manager]
check box, and then click [Next]. Follow the instructions on the screen to install
Device Software Manager.
To not install Device Software Manager clear the [Install Device Software Manager]
check box, and then click [Next].
4. When the installation is complete, click [Finish].
Installing the Printer Driver for Network Connection (macOS)
Install the PPD file (printer driver) under macOS, and then register the machine on the
computer from the system preferences.
• You need an administrator name and a password (phrase). For details, consult
your network administrator.
• Setting procedures using macOS 12.2 are shown as an example. The actual
procedure may differ depending on the OS version you are using.
To Next Page
Loading...
