Fax Transmission (Application)
Confirming the Scanned Image Before Sending a Fax
You can display the preview of the scanned document on the display of the machine to
check if it is scanned as specified.
This function cannot be used when sending a fax while using any of the following:
• Immediate Transmission
• On-hook dialing
• Manual dialing
See "Speaking with a Person at the Destination Before Sending a Fax (Manual
Dialing)", User Guide (HTML).
To display the preview in the correct orientation, specify [Original Orientation] in
[Settings] correctly.
1. Press [Fax] on the Home screen.
2. Place the original in the Auto Document Feeder (ADF) or on the exposure glass.
See "Setting an Original to Send by Fax on the Scanner", User Guide (HTML).
3. On the fax screen, press [Settings] [Original Orientation] to specify the
orientation of the original, and then press [Preview].
4. Configure the scan settings.
See "Sending a Fax at the Image Quality Suitable for the Original", User Guide
(HTML).
To Next Page
Loading...
