Ricoh IM C3510 - Messages that Appear with Error Codes

8. Troubleshooting
250
8
Message
Cause
Solution and reference
"You do not have a
privilege to use this
function. This job
has been
cancelled."
Authentication
information is not
registered correctly
in the printer driver.
Specify the authentication information in
the printer driver. For the authentication
information, consult the user
administrator (or custom-privileges
administrator who has equivalent
privilege).
See "Specifying Login Information in the
Printer Driver", User Guide (HTML).
The user registered
in the printer driver
does not have
permission to use
the printer function.
Consult the user administrator (or
custom-privileges administrator who has
equivalent privilege). The user
administrator can change the access
permissions in the address book.
See "Confirming the Available Functions",
User Guide (HTML).
"Z-fold error."
A setting in which
Z-fold cannot be
performed was
specified, and the
Z-fold function was
canceled.
Check the tray, paper orientation and print
data orientation settings, and the
specified position for postprocessing.
Messages that Appear with Error Codes
Check the system configuration list or print settings list. The details of the error may also
be printed in the list.
See "List/Test Print", User Guide (HTML).
Message
Cause
Solution and reference
"84: Error"
The amount of
available work area
is insufficient for
processing images.
Reduce the transmission data.
"86: Error"
The parameter in
the control code is
incorrect.
Specify the correct parameter.
"92: The print job
was cancelled."
Printing is canceled
from the control
panel.
To perform printing, operate the control
panel again.