Ricoh IM C2510 - Messages that Appear When There Is a Problem with the Certificate

When Messages Appear
281
8
Message
Cause
Solution and reference
"Exceeded time
limit for LDAP
server search.
Check the server
status."
The network is
busy.
Try again.
The setting
information is
incorrect.
Check the setting information of [Settings]
[System Settings] [Settings for
Administrator]
[Authentication/Charge]
[Administrator Authentication/User
Authentication/App Auth.]
[Register/Change/Delete LDAP Server].
See "Registering the LDAP Server", User
Guide (HTML).
"LDAP server
authentication has
failed. Check the
settings."
The user name or
password is
incorrect.
Select the user in the address book, press
[Edit], and specify the correct user name
and password in [User Management /
Other] tab [User Management]
[LDAP Authentication Info].
See "Registering a User in the Address
Book and Specifying the Login
Information", User Guide (HTML).
Messages that Appear When There Is a Problem with the Certificate
Message
Cause
Solution and reference
"The destination
cannot be selected
because the device
certificate used for
the S/MIME
signature is not
currently valid.
Please check the
certificate."
*1
The device
certificate used for
the S/MIME
signature is not
currently valid.
Install a new device certificate used for
the S/MIME signature.
See ”Encrypting Network
Communication”, User Guide (HTML).