2. Press [User Name].
3. Enter the login user name, and then press [Done].
4. Press [Password].
5. Enter the login password, and then press [Done].
6. Press [Login].
• If an incorrect password is entered a specified number of times, login with the same
name is disabled (Lockout Function). The default setting for unsuccessful attempts
before a user is locked out is five. If the user is locked out, the administrator must
release the lockout.
See ”Specifying the Policy on Login/Logout”, User Guide (HTML).
• To log out from the machine, press [Logout] at the top right on the screen, and then
press [OK].
Logging In Using an IC Card
Hold an IC card over the IC card reader to the right of the control panel. If the card is not
registered on the machine, enter the authentication information and register the card.
1. Hold an IC card over the IC card reader.
• When the card is registered on the machine, login operation finishes.
• When the card is not registered, the registration screen is displayed. Proceed to
the next step to register the card.
To Next Page
Loading...
