Ricoh IM C2510 - Scanning Documents and Sending the Scanned Data to a Folder

Basic Scanning
175
6
• To enter the e-mail address manually, select the destination from the
destination history, or search for the destination in the machine address book
and registered LDAP server, press , and specify the destination.
• When specifying an e-mail address by entering it manually, you can register the
e-mail address in the address book before sending the e-mail.
1. Press , and then select [Enter Using Keyboard].
2. Enter the e-mail address, and press .
3. Specify the e-mail address that was entered manually and press [Reg. to
Add. Book].
4. Enter the name and other additional information.
• When specifying an e-mail address by entering it manually, you can register the
e-mail address in the address book before sending the e-mail.
1. Press , and then select [Select from History].
2. Press [Register] for the destination to register.
3. Register the name and other additional information.
• Press to specify the destination again or select [To], [Cc] or [Bcc].