The User Code entry
screen is displayed.
User Code
authentication is
specified.
Enter the User Code, and press
[OK]. Consult the user
administrator (or custom-
privileges administrator who has
equivalent privilege) for the user
code.
A function is not
executed, or you cannot
perform an operation.
Another function that
cannot be used with the
specified function at the
same time is being
executed.
Wait for the function in progress
to end, and then perform the
next operation. For details about
functions that cannot be used at
the same time, see the following
section:
page399”Function
Compatibility”
When a backup of the address
book is being created using Web
Image Monitor or another
method, the next function is
executed after the backup is
completed.
The key is unresponsive,
or another key is
activated.
A malfunction is
temporarily occurring on
the machine.
There is a device or
equipment that is
generating noise in the
vicinity.
Turn off the power of the
machine, wait for 10 seconds or
more after confirming that the
main power indicator is turned
off, and then turn on the power
again.
page19”Turning On and Off the
Power”
If the message persists even
after you have turned the power
off and then on, consider
repairing the machine.
Multi-touch, such as
pinch-in and pinch-out,
does not work properly.
You cannot interrupt
copying even after
pressing [Stop] while
the copy function is
operating.
A malfunction is
temporarily occurring on
the machine.
You cannot interrupt
copying or scanning
even after pressing
[Stop], and the login
screen is displayed.
Basic Authentication,
Windows
Authentication, or LDAP
Authentication is
specified, and the user
who started the copying
or scanning operation
has logged out.
Log in to the machine as the user
who started the copying or
scanning operation or as the
machine administrator (or
custom-privileges administrator
who has equivalent privilege),
and press [Stop].
To Next Page
Loading...
