Printing > Various Print Functions > Printing with a Layout Suitable for Making Booklets
Printing with a Layout Suitable for Making Booklets
Follow the procedure below to print on both sides of paper using a layout suitable for making booklets.
● There are two kinds of booklet layout: [Booklet 1] and [Booklet 2]. With [Booklet 1], each sheet is folded in half separately, then the folded
sheets are stacked and bound. With [Booklet 2], the whole stack is folded in half in a similar way to a magazine.
Open the file you want to print from the application, and then open the printer properties dialog box.
Click the [Edit] tab.
Select the [Duplex/Booklet] check box.
Click the icon representing the booklet format you want to use.
● The icons are displayed in either landscape or portrait depending on the document orientation.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Make print settings, and then click [OK].
● Opening from an Application
● Printing on Both Sides of Paper
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0053.htm2005/10/05 12:03:44
To Next Page
Loading...
