Troubleshooting > Paper Jam > Removing Paper Jammed in the Optional Tray (Tray 2 (Optional)/Tray 2 Rear Cover)
Removing Paper Jammed in the Optional Tray (Tray 2 (Optional)/Tray 2 Rear Cover)
Follow the procedure below to remove paper jammed in tray 2 (optional).
Hold the grip on tray 2 (optional), lift the tray slightly, and then pull it out.
● Pull tray 2 (optional) completely out. Take care not to drop it.
Lift off the cover.
Remove jammed paper.
Re-attach the cover.
Push tray 2 (optional) gently in until it stops.
Press the [Resume] key.
Printing starts.
● Blank paper may be delivered after printing resumes.
If you cannot locate paper jammed in tray 2 (optional), follow the procedure below to remove the paper jammed.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0002.htm (1 of 2)2005/10/05 12:04:53
To Next Page
Loading...
