Additional Information > Cleaning
Cleaning
Clean the outside of the printer regularly to maintain the condition of the printer.
● To avoid hazardous electric shock, do not remove any covers or screws other than those specified in this manual. When
the machine needs to be checked, adjusted, or repaired, contact your service representative.
● Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock, explosion or loss
of sight.
To clean the exterior of the printer, wipe it with a soft, dry or damp cloth. If the dirt does not come off, wipe the
printer first with a cloth moistened with a neutral detergent, then with a damp cloth, and finally with a dry cloth.
● Do not use volatile chemicals like benzene or thinner, or insecticides on the printer. Using these chemicals could deform, crack, or change
the color of the printer.
● When wiping the printer with a cloth moistened with detergent, be sure to wipe only the exterior.
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0160.htm2005/10/05 12:09:11
To Next Page
Loading...
