Printing > Adjusting Print Quality > Printing with Print Quality Settings You Want > Printing a Whole Page as an Image
Printing a Whole Page as an Image
This section explains how to convert a print job to image data using a Windows application, and then print the image
using the printer driver. Follow the procedure below to print a whole page as an image. This will allow you to get print
results that resemble the display image more closely. Since more data has to be processed, printing will take much
longer. Use this function if the printed image differs from the display image.
● Black or gray parts will be printed with the four CMYK colors regardless of the settings made in the [Gray reproduction (Text/Line Art):] list
on the [Image Adjustments] tab in the [Change User Settings] dialog box.
● This setting overrides the watermark setting.
Open the file you want to print from the application, and then open the printer properties dialog box.
On the [Setup] tab, click [User settings] in the [Print Quality] area.
Click [Change...].
The [Change User Settings] dialog box appears.
Click the [Misc.] tab.
Select the [Print as bitmap] check box.
Click [OK].
The [Change User Settings] dialog box closes.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Make print settings, and then click [OK].
● Opening from an Application
● Printing Images or Text Superimposed on Prints
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0030.htm2005/10/05 12:03:17
To Next Page
Loading...
