Printing > Various Print Functions > Printing on Registered Custom Size Paper
Printing on Registered Custom Size Paper
Follow the procedure below to print on registered custom size paper.
● Register the size of the custom size paper loaded in the paper tray in the [Printer Configuration] dialog box.
Open the [Page Setup] dialog box from the application.
The [Page Setup] dialog box is usually opened by clicking [Page Setup...] on the [File] menu, but the method to
open it may differ in some applications. Open the dialog box according to the application being used.
Open the printer properties dialog box from the [Page Setup] dialog box.
Click the [Page Settings] tab.
In the [Original size:] list, select a custom paper size.
Select from the sizes already registered.
Click [Portrait] or [Landscape].
Select the orientation that matches the document orientation and feeding direction.
Click the [Setup] tab.
Check that the tray with the paper you want to print on is selected in the [Paper source tray:] list.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Check that the orientation selected in the [Setup] dialog box of the application is the same as that
selected in step
.
If it is not, make the correct setting.
Close the [Page Setup] dialog box of the application.
Create a file in the application.
In the printer properties dialog box, make the print settings for the printer selected in step , and
then click [OK].
● Opening from an Application
● For details about [Custom Paper Sizes], see the printer driver Help.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0045.htm (1 of 2)2005/10/05 12:03:35
To Next Page
Loading...
