Ricoh L5160 - Page 13

CIP Training L5160/L5130
Basic Operation
2. Press [Media Feed Adjustment].
3. Press [Manual].
4. Press [Execute].
5. Select a print mode from [6 Pass] or [8 Pass / 12 Pass / 16 Pass / 32 Pass].
If using the machine with white ink, select a print mode from [6 Pass], [8 Pass / 12 Pass / 16
Pass], or [32 Pass / 12 Pass (White)].
6. Press [Execute].
The test pattern of the media feed adjustment is printed.
7. Press [Feed] or [Rewind] to feed the media to the position where the pattern can be seen
properly.
8. Press [Next].
9. Check the optimal adjustment value based on the printing result of the test pattern of the
media feed adjustment.
The value with the straightest horizontal lines and faintest squares is the appropriate
adjustment value. Assess according to the horizontal lines at 6 positions.
EDP012
+10
0
+30
-70
-30
-10
0
+10
+30
+70
1. If the horizontal line for "+10" is the straightest, the adjustment value is +10.
+10
0
+10
EDP017
If the lines for "0" and "+10" are oblique contrariwise, the adjustment value is between 0
and+10.