Changing an NCP Registered Folder
This section describes how to change the registered NCP folder.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the user of the registered folder you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, folder name, or e-mail address.
7. Press [Folder].
8. Select "Connection Type".
If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a
NetWare server, press [Bindery].
9. Specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
10. Press [Connection Test] to check the path is set correctly.
11. Press [Exit].
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
5. Registering Addresses and Users for Scanner Functions
236
To Next Page
Loading...
