• p.204 "Registering Names"
Changing the protocol
This section describes how to change the protocol.
1. Press [SMB] or [FTP].
2. A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3. Enter each item again.
Deleting an NCP Folder
This section describes how to delete the registered NCP folder.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
Registering Folders
237
To Next Page
Loading...
